Our Accreditations
National Association of Testing Authorities, Australia
SCOPE OF ACCREDITATION
ISO/IEC 17020 (2012)
Infrastructure and Asset Integrity
Evaluation of load generating lifting appliances
SERVICE
PRODUCT
Conveyors; Cranes; Lifting devices;
DETERMINANT
TECHNIQUE
PROCEDURE
LIMITATION / RANGE
In-service inspection;
AS 1418, AS 3978
Visual inspection of structural components only.
Industrial machinery - Inspection
Mobile equipment - Periodic inspection
Pressure plant, pipelines and equipment - Fabrication inspection
Pressure plant, pipelines and equipment - In-service inspection
Plant;
Buckets; Coal and overburden drills; Draglines;
Boilers; Fired pressure vessels; Pressure piping; Unfired pressure vessels;
Auxiliary vessels; Compressed air containing vessels; Pressure piping; Pressure relief devices; Process vessels; Static storage vessels; Transportable vessels;
In-service inspection;
In-service inspection;
Fabrication inspection;
In-service inspection;
AS 3978, in-house procedures
AS 3978, in-house procedures
Visual inspection of structural components only.
Visual inspection of structural components only.
AS 1210
Hazard levels: A, B, C, D, E
AS/NZS 3788, AS 4343 hazard levels, in-house procedures
Process vessels limited to heat exchangers, reheaters, vacuum vessels and deaerators
Transportable vessels limited to those containing very harmful liquid (VHL), harmful gas (HL), Harmful Liquid (HL), Non-harmful gas (NHG) and Non-harmful liquid (NHL), limited to the following transportable vessels: roadtanker, rail tanker, portable and tank shipping containers and smaller vessels.
ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity
SERVICE
PRODUCT
DETERMINANT
TECHNIQUE
PROCEDURE
LIMITATION / RANGE
Evaluation of mechanical performance of pressure plant, pipelines and equipment
Piping;
Hydrostatic pressure;
Not applicable;
AS 4037, AS 4041
200 to 8000 kPa
Non-destructive examination - Material properties and internal integrity
Metallic storage vessels; Pressure vessels;
Castings - Cast irons, steel and alloy steels; Metallic tubes - Ferromagnetic materials; Piping - Ferromagnetic materials; Piping - Non-ferromagnetic materials; Rolled or wrought steel products; Welded joints - Ferritic materials;
Hydrostatic pressure;
Ultrasonic detection and characterisation of discontinuities;
Not applicable;
A-scan capability;
As 1210, AS 4037
200 to 8000 kPa
Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Composite materials; Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Copper and copper-nickel alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austentic and duplex materials; Welded joints - Titanium and titanium alloys;
Radiographic detection and characterisation of discontinuities;
Reinforcing in conveyor belts, hoses and other specified rubber products
Non-destructive examination - Product profile and corrosion mapping
Metallic piping; Metallic plate; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials;
Radiographic determination of wall thickness and material profiling;
Ultrasonic material profiling and characterisation of material loss; Ultrasonic material thickness - Spot or grid measurements;
Non-destructive examination - Surface techniques
Metallic surfaces;
Visual detection of discontinuities (prior to initial service) - Castings;
Dye penetrant detection of discontinuities;
Visual detection of discontinuities (prior to initial service) - Forgings;
Visual detection of discontinuities (prior to initial service) - Welded joints;